Varnum Continentals

Preserving and Sharing Rhode Island History

  • Email
  • Facebook
  • Instagram
  • Twitter
  • Home
  • Join!
    • Varnum Continentals Marching Militia
    • Varnum Continentals Membership
  • Donate
  • About
    • History of the Varnum Continentals
    • About James Mitchell Varnum
    • Officers of Corporation and Board of Trustees
  • Event Rentals
    • Event Rentals at the Varnum Memorial Armory
  • Museums
    • Featured Museum Exhibits
    • Varnum Memorial Armory Museum
      • Tour the Varnum Memorial Armory Museum
    • Varnum House Museum
    • Book a Museum Tour
    • EVENT SPACES FOR RENT
  • Feature Articles
  • Blog
  • Calendar
  • Contact
  • RENEW YOUR MEMBERSHIP!
  • Join the Varnums!
  • Make a Donation!
  • Book a Tour!
  • EVENT SPACES FOR RENT
You are here: Home / Archives for Charles Tillinghast James

[FEATURE ARTICLE] Rhode Island’s Charles Tillinghast James: An Artillery Pioneer

September 4, 2015 By Brian Wallin

Charles Tillinghast James
Charles Tillinghast James

West Greenwich native Charles Tillinghast James was a product of the Industrial Revolution who achieved fame in such diverse areas as the textile industry, politics, and ultimately, munitions. It was the latter that brought him to his end and for which he is perhaps best remembered. James was born in 1805. From humble beginnings as a carpenter, he became a largely self-taught machinist and engineer. In a state as small as Rhode Island, it didn’t take him long to be noticed by none other than famed local industrialist Samuel Slater, who took him under his wing. Before long, James was propelled into financial success in setting up and operating steam-powered mills throughout New England. He then tried his hand at politics and served in the U.S. Senate from 1851 to 1857 as a member of the Democratic Party. During this period, he also became active in the Rhode Island State Militia and was appointed as a major general.

Here’s where his story turns really interesting and the Varnum connection eventually comes in. Prior to the outbreak of the Civil War, the United States Army relied solely on smoothbore cannon. One of the most popular was the Model 1841, a bronze six-pounder, referring to the weight of a solid projectile. (The term “pounds” is applied to the weight of shot that can be fired from a cannon of the same caliber or width of the bore, in this case 3.67”.) When the smoothbore 6-pounders were rifled, the bore was expanded to 3.80”. Because of that they were sometimes confused with future, heavier cannon that were designed to fire a 14-pound projectile.

Rifling a cannon barrel allowed the round to twist in flight, increasing its range and accuracy. As the Civil War loomed, it was apparent that increased range, accuracy, and the versatility of ammunition would become important and decisive factors in future battles. Because of the abundance of smoothbore weapons in the Army’s inventory, a quick solution was to re-bore existing cannon such as the Model 1841 with rifling to accommodate the more sophisticated rounds being developed.

Two Model 1829 32-pounder siege and garrison guns, rifled by the James method (64-pdr James rifles). The one in the foreground is on a siege carriage. The one behind is on an iron, front pintle, barbette carriage.
Two Model 1829 32-pounder siege and garrison guns, rifled by the James method (64-pdr James rifles). The one in the foreground is on a siege carriage. The one behind is on an iron, front pintle, barbette carriage.

Remember that Charles James had trained as a machinist and engineer? Well, in 1856, shortly before leaving the Senate, he was granted the first of two patents (the second was issued in 1862) for “improvements to a cannon projectile.” Called James Federal Pattern Projectiles, they were designed for use in a rifled cannon barrel. Functioning properly, these shells would result in added range and power. Unfortunately for James, he had a good idea but couldn’t get it to work according to plan. The first variant of the James Projectile had the nasty habit of tearing the sabot lead ring from the shell during flight, resulting in friendly fire casualties from short rounds and shrapnel. The second attempt wasn’t much of an improvement. Although the rounds mostly stayed intact, the projectiles caused significant wear on the rifled barrels of the bronze cannon in which they were used. To add insult to injury, the shells often failed to explode.

Despite the unpredictability of these early designs, the U.S. Army chose to use James’ Pattern Projectiles in the early stages of the Civil War. The Army contracted with the Ames Manufacturing Company of Chicopee, Massachusetts, to re-bore a number of bronze six pounder smoothbores using James’ design. The company had already gained worldwide fame as a maker of military swords and sabers (a number of which are in the Varnum  collection). James worked directly with the Ames Company on their early re-bores as well as a series of 3.80” bore variants, ranging up to 14-pounders. The final variation – and the most durable – was cast from iron instead of bronze.

In the early months of the war, James continued to experiment and tried to interest others in his designs. On October 17, 1862, he was demonstrating his projectiles to a group of foreign military officers gathered on Long Island. One of his workers was attempting to remove a misfire, when the shell exploded, killing him instantly and fatally wounding James himself. He died the next day. He was 57 years old. James is buried at Swan Point Cemetery.

A James pattern solid shot. The “birdcage” at the base would have been covered by sheet lead which, upon firing the gun, would have expanded into the grooves of the rifling.
A James pattern solid shot. The “birdcage” at the base would have been covered by sheet lead which, upon firing the gun, would have expanded into the grooves of the rifling.

In spite of the unpredictability of the James round, when it did work, it was with devastating results. For example, James shot and shells were used in the successful Union bombardment of Fort Pulaski on April 10-11, 1862. Larger caliber James rifled cannon were equally and effectively used along with artillery designed by Robert P. Parrott.

Nonetheless, the durability and value of the James lighter rifled cannons remained a problem. Because these bronze cannons fired an iron round, their barrels wore out after only a few hundred rounds, leading to their replacement by more durable weapons shortly after the Fort Pulaski siege. The James guns wound up being used for training purposes by Federal forces.

Among the Federalized units equipped with the early models of James cannon and projectiles was the 1st Rhode Island Light Artillery. Their batteries were among the first to be called into active service shortly after hostilities broke out in 1861. They were issued James six pounders in the Battles of Bull Run, Bolivar Heights, and Ball’s Bluff. On all occasions, the James rifled cannon proved to be a disappointment, lacking in accuracy. (According to one account, a number of rounds fired at Bull Run landed unexploded some three miles from their intended target.) Batteries of the 1st Rhode Island served throughout the war and in almost every area of the country. Along the way, they were equipped with steadily improved weaponry. Among the most popular and effective was the 12-pounder Napoleon. Based on a French design, it was capable of hurling a projectile up to 1,300 yards.

The Varnum Armory collection includes a very rare and good example of a James 6-pounder cannon. The Model 1860 rifled re-bore done by the Ames Company. We also have a companion smoothbore Model 1841 cannon.

Both cannon tubes were acquired from the State of Rhode Island. The rifled cannon is mounted on a genuine Civil War era single trail carriage, acquired in 1943 with a companion limber. The smooth bore sits on a much older, double trail carriage possibly dating to the Revolutionary War Era.

Historic Canons and Artillery at the Varnum Memorial Armory
The Varnum Armory collection includes a very rare and good example of a James 6-pounder cannon.

By Varnum Trustee & Member Brian Wallin

Filed Under: Feature Article, Varnum Memorial Armory Tagged With: 19th century, Charles Tillinghast James, civil war, varnum memorial armory

[DEC. 12 DINNER MEETING] Speaker Greg Banner on The Halifax Disaster

December 3, 2022 By James Mitchell Varnum

In December 1917, a World War I ammunition ship blew up in Halifax Harbour, Nova Scotia. This massive event was listed as the largest man-made explosion in human history prior to atomic weapons and totally devastated the city. Thousands died. Our December speaker, Varnum Member Greg Banner, will describe the background, event, response, and results and discuss aspects of military, nautical, local, and emergency response history.

About the Varnum Continentals

The Varnum Continentals are committed to the preservation of the historic heritage of our community, our state, and our nation. Please take a virtual tour of our museums to learn more about our mission to encourage patriotism. You can participate with us through active membership and/or philanthropic support in our non-profit organization. Donations are tax deductible to the full extent allowed by law. Museum tours are welcomed and our facilities may be rented for suitable events.

Our Mission

The Varnum Continentals are committed to encourage patriotism through the Varnum Armory Museum, the Continental Militia, and the James Mitchell Varnum House and thus to preserve, support, and communicate the military history of our community, our state, and our nation.

Recent Posts

  • [DEC. 12 DINNER MEETING] Speaker Greg Banner on The Halifax Disaster
  • Varnum Armory Bathroom Renovation!
  • Watch the Varnum Armory on Rhode Island Wave!

Search

Copyright © 2023 Varnum Continentals || Log in